The Ventilation Drying System (VDS) shipping carton measures 470×335×305 mm. Conduct the unboxing procedure on a level, stable surface that offers ample workspace and clearance.
Save the shipping carton and all interior foam inserts. This specialized packaging is critical for safe transport, factory service, or extended storage.
¶ Unboxing Procedures
¶ Removing the Device
- Cut the packaging tape and open the shipping carton.
|
|
When using a cutting tool, always direct the blade away from your body. Apply slow, even pressure to cut the packaging tape. Avoid excessive force to prevent injuries.
- Reach into the gaps between the device and the foam inserts, grip the device securely, and lift it straight up out of the carton. Place it on a stable, level surface.
|
|
- Slide the foam inserts off both sides of the device.
|
|
-
Take out the Quick Start Guide and the Drying Temperature Reference Sticker from the foam.
-
Peel off the tape and remove the plastic bag.
|
|
- Remove the protective film.
¶ Removing the Accessories
-
Move the slide latches of both chambers to the unlocked position.
-
Open the chamber covers and remove the protective foam.
-
Remove the accessory kit and the bottom foam.
-
Verify all included items against the accessories list.
-
Peel off the tape securing the desiccant compartment.
¶ Placing the Desiccant
Each chamber features a desiccant compartment for holding desiccant to absorb moisture and maintain a dry environment.
-
Tear open the outer packaging of two desiccant packs.
-
Press the indicated area and flip up the desiccant compartment cover.
-
Place one desiccant pack and snap the cover back into place.
Do not tear open the desiccant pack or pour the pellets directly into the compartment.
- Repeat the same process for the desiccant compartment on the other side.
¶ Connecting Power
-
Plug the provided power cord into the power port on the device and connect it to a power source.
-
Wait a few seconds until a chime sounds. This indicates that the device has powered on normally.
The device supports both connected and standalone modes. For detailed operating instructions, refer to Connecting VDS to the Creator 5 series and Standalone Mode。
¶ Unboxing Video
Video coming soon.