¶ Suggestions on Build Plate Usage:
1. For the PEI powder-coated build plate, it is recommended to use it with glue. It is suitable for printing materials including PLA, PETG, PLA-CF, PETG-CF, ABS, and ASA. When printing TPU on this build plate, there is no need to apply glue.
Note: The PEI powder-coated build plate comes as standard with the equipment.
2. The PC sticker flexible build plate is suitable for printing PC, ABS, and ASA.
Note: The PC sticker flexible build plate comes as standard with the equipment.
3. After applying glue to the build plate, it can be cleaned with water.
4. If the build plate gets oily, it can be cleaned with a dish detergent.
5. If the build plate deforms significantly after long-term use, it is recommended to replace it with a new one.
¶ Suggestions on Model Removal:
1. After printing is completed, the build plate may still be at a high temperature. It is recommended to wait for it to cool down before removing the build plate and the model.
2. Please take the build plate outside the printer for model removal. Otherwise, model debris may easily fall inside the chamber, resulting in unknown issues.
3. It is recommended to use a scraper to remove models printed with TPU or other flexible materials, which ensures you can remove the flexible models from the build plate without causing damage.
¶ Model Removal After Printing:
After printing is completed, allow the flexible steel plate to cool down, then remove it and bend it to remove the model.
