})
Once the printer is connected to the internet, you can connect it to the FlashCloud and send print files from the cloud to the printer.
1. On the FlashCloud interface, turn on the FlashCloud switch, and you will obtain a registration code.
2. Open the FlashCloud official website at https://cloud.sz3dp.com/ and log in as instructed. In the [My Printer] menu, click [Add Printer]. Enter the registration code obtained above, along with a customized printer name. After a successful connection, the customized printer name will appear on the printer.
Once added successfully, the printer name will be displayed.
1. Choose a model from [Model Library] (Figure 1) or upload a model via [My Model] (Figure 2).
Figure 1
Figure 2
2. Slice the selected model.
Click [Print] to enter the model slicing interface.
In the top-left drop-down menu, select the correct printer.Adjust the model size and other parameters, and then click [Print] to complete slicing.
3. Send the sliced model to the printer.
Click [Start] to send the sliced model to the printer.
File transfer via FlashCloud in progress