ΒΆ Multi-Machine Control
FlashPrint 5 features batch management for multiple devices. You can access the multi-machine control panel in two ways:
1.Click [Multi-Machine Control] under the [Tools] menu.
2.Click [
] in the right-side toolbar.
The multi-machine control panel, as shown below, allows for group management, multi-machine control, individual viewing and control operations.
Group Management: After connecting a device, you can move it to a specific group. (Method: Right-click on the selected device, and then choose the target group.)
Multi-Machine Control: Here you can view real-time temperature, pause, or cancel printing for running devices. You can also simultaneously send sliced files to multiple devices of the same type for printing. (Method: Slice an STL file, open the multi-machine control panel, select idle devices of the same type, and click [Send GCode].)
Individual Viewing and Control: Click [
] to enter the details page for this device.
On the details page, you can control the chamber light, view real-time video (note: this function requires a printer with a camera; Adventurer 5M does not come with a camera [optional to install separately]), and take photos.
If the device is idle, you can choose a model file from the device's memory to start printing directly.
If the device is printing, you can check real-time temperature or perform actions like pause, cancel, modify temperature, or adjust speed.