Glue
1.Glue helps improve adhesion between the printed part and the heated bed, preventing warping or detachment during printing. It is particularly recommended for PLA, ABS, PETG, and TPU.
2.Cleaning: Wipe the build plate surface with isopropyl alcohol or alcohol wipes to remove dust, grease, and old glue residue. Make sure the surface is clean and dry.
3.Preheating: Heat the bed to the required printing temperature (e.g., ABS: 100°C, PETG: 60°C) before applying glue. Preheating helps form a more even adhesive layer and improves bonding strength.