This section introduces the detailed list of printing materials supported by each model of FlashForge equipment.
| Filaments Supported by Flashforge Printers | |||
|---|---|---|---|
| Printer Model | Supported Filaments | Printability | Tips |
| AD5M |
PLA, PETG, SILK, PLA-CF, PETG-CF TPU 95A, TPU 64D |
Recommended: PLA, PETG, SILK, PLA-CF, PETG-CF TPU 95A, TPU 64D |
For TPU 95A and TPU 64D, a 0.6mm nozzle is recommended to reduce the risk of clogging. While a 0.4mm nozzle can be used, it carries a higher risk of clogging; For PLA-CF and PETG-CF, a 0.6mm nozzle is recommended to reduce the risk of clogging. While a 0.4mm nozzle can be used, it carries a higher risk of clogging; For filaments with particles (e.g., marble, wood, or sparkle series), a 0.6mm nozzle is recommended. |
| AD5M PRO |
PLA, PETG, SILK, PLA-CF, PETG-CF, ABS, ASA, TPU 64D |
Recommended: PLA, PETG, SILK, PLA-CF, PETG-CF,TPU 64D; Capable: ABS, ASA |
For TPU 64D, a 0.6mm nozzle is recommended to reduce the risk of clogging. While a 0.4mm nozzle can be used, it carries a higher risk of clogging; For PLA-CF and PETG-CF, a 0.6mm nozzle is recommended to reduce the risk of clogging. While a 0.4mm nozzle can be used, it carries a higher risk of clogging; For filaments with particles (e.g., marble, wood, or sparkle series), a 0.6mm nozzle is recommended. |
| AD5X |
PLA, PETG, PLA-CF, PETG-CF TPU 64D, SILK |
Recommended: PLA, PETG, SILK, PLA-CF, PETG-CF, TPU 64D |
For TPU 64D, a 0.6mm nozzle is recommended to reduce the risk of clogging. While a 0.4mm nozzle can be used, it carries a higher risk of clogging; For PLA-CF and PETG-CF, a 0.6mm nozzle is recommended to reduce the risk of clogging. While a 0.4mm nozzle can be used, it carries a higher risk of clogging; For filaments with particles (e.g., marble, wood, or sparkle series), a 0.6mm nozzle is recommended. |
| Finder 5 | PLA, PLA-CF, PETG, PETG-CF, SILK, TPU 90A-95A, TPU 64D, PVA | Recommended: PLA, PLA-CF, PETG, PETG-CF, SILK, TPU 95A, TPU 64D, PVA, TPU 90A |
For TPU 90A-95A and TPU 64D, a 0.6mm nozzle is recommended to reduce the risk of clogging. While a 0.4mm nozzle can be used, it carries a higher risk of clogging; For PLA-CF and PETG-CF, a 0.6mm nozzle is recommended to reduce the risk of clogging. While a 0.4mm nozzle can be used, it carries a higher risk of clogging; For filaments with particles (e.g., marble, wood, or sparkle series), a 0.6mm nozzle is recommended. |
| Creator 5 |
PLA, PETG, TPU 90A-95A, TPU 64D, SILK; PLA-CF, PETG-CF, PVA, BVOH; ABS, ASA， PA-CF, PET-CF, PAHT-CF, ASA-CF(GF), ABS-CF(GF), PPA-CF(GF), PPS-CF, S-Multi, S-PATH; |
Recommended: PLA, PETG, TPU 90A-95A, PLA-CF, PETG-CF, SILK, PVA, BVOH, S-Multi, S-PATH; Capable: ABS, ASA, PA-CF, PET-CF, PAHT-CF, ASA-CF(GF), ABS-CF(GF), PPA-CF(GF), PPS-CF As this is an open-frame printer, filaments listed as "Capable" can be printed but may not deliver full performance. For optimal results, we recommend using the CREATOR 5M PRO or CREATOR 5S PRO. |
For TPU 90A-95A, a 0.6mm nozzle is recommended to reduce the risk of clogging. While a 0.4mm nozzle can be used, it carries a higher risk of clogging; For fiber-reinforced filaments, a 0.6mm nozzle is recommended to reduce the risk of clogging. While a 0.4mm nozzle can be used, it carries a higher risk of clogging; For filaments with particles (e.g., marble, wood, or sparkle series), a 0.6mm nozzle is recommended. |
| Creator 5 Pro |
PLA, PETG, TPU 90A-95A, TPU 64D, SILK; PLA-CF, PETG-CF, PVA, BVOH; ABS, ASA； PA-CF, PET-CF, PAHT-CF, ASA-CF(GF), ABS-CF(GF), PPA-CF(GF), PPS-CF, S-Multi, S-PATH; PC, PA, PC-ABS; |
Recommended: PLA, PETG, TPU 90A-95A, PLA-CF, PETG-CF, PET, SILK, PVA, BVOH, S-Multi, S-PATH; Featured: ABS, ASA, PA-CF, PET-CF, PAHT-CF, ASA-CF(GF), ABS-CF(GF), PPA-CF(GF); Capable: PC, PA, PC-ABS, PPS-CF (limited on small models) |
For TPU 90A-95A, a 0.6mm nozzle is recommended to reduce the risk of clogging. While a 0.4mm nozzle can be used, it carries a higher risk of clogging; For fiber-reinforced filaments, a 0.6mm nozzle is recommended to reduce the risk of clogging. While a 0.4mm nozzle can be used, it carries a higher risk of clogging; For filaments with particles (e.g., marble, wood, or sparkle series), a 0.6mm nozzle is recommended. |
| Creator 5S |
PLA, PETG, TPU 80A-95A, TPU 64D, SILK; PLA-CF, PETG-CF, PVA, BVOH; ABS, ASA； PAHT-CF, PA-CF, PET-CF, ABS-CF(GF), ASA-CF(GF), PPA-CF(GF), PPS-CF, S-Multi, S-PATH |
Recommended: PLA, PETG, TPU 80A-95A, PLA-CF, PETG-CF, SILK; Capable: PVA, BVOH, ABS, ASA, PA-CF, PET-CF, PAHT-CF, ASA-CF(GF), ABS-CF(GF), PPA-CF(GF), PPS-CF, S-Multi, S-PATH As this is an open-frame printer, filaments listed as "Capable" can be printed but may not deliver full performance. For optimal results, we recommend using the CREATOR 5S PRO. |
For TPU 95A and TPU 64D, a 0.6mm nozzle is recommended to reduce the risk of clogging. While a 0.4mm nozzle can be used, it carries a higher risk of clogging; For fiber-reinforced filaments, a 0.6mm nozzle is recommended to reduce the risk of clogging. While a 0.4mm nozzle can be used, it carries a higher risk of clogging; For TPU 80A-90A, a dedicated extruder for flexible filaments is recommended. For filaments with particles (e.g., marble, wood, or sparkle series), a 0.6mm nozzle is recommended. |
| Creator 5S Pro |
PLA, PETG, TPU 80A-95A, TPU 64D, SILK; PLA-CF, PETG-CF, PVA, BVOH； ABS, ASA, PC, PA, PC-ABS; PAHT-CF, PA-CF, PET-CF, PC-CF, ABS-CF(GF), ASA-CF(GF), PPA-CF(GF), PPS-CF, S-Multi, S-PATH |
Recommended: PLA, PETG, TPU 80A-95A, TPU 64D, PLA-CF, PETG-CF, SILK, PVA, BVOH, S-Multi, S-PATH; Featured: ABS, ASA, PA-CF, PET-CF, PAHT-CF, ASA-CF(GF), ABS-CF(GF), PPA-CF(GF), PPS-CF; Capable: PC, PA, PC-ABS, PC-CF (limited on small models) |
For TPU 95A and TPU 64D, a 0.6mm nozzle is recommended to reduce the risk of clogging; For fiber-reinforced filaments, a 0.6mm nozzle is recommended to reduce the risk of clogging; For TPU 80A-90A, a dedicated extruder for flexible filaments is recommended. For filaments with particles (e.g., marble, wood, or sparkle series), a 0.6mm nozzle is recommended. |
|
|||