Creator5-1.9.3-1.2.5-20260615
1. Fixed abnormal issues occurring during startup wizard.
2. Fixed abnormal noise under high-speed operation.
3. Optimized the firmware upgrade process.
4. Optimize fan control during filament feeding for models with chamber temperature.
5. Fix other known bugs.
Creator5-1.9.2-1.2.3-20260603
1.Optimize power-off resume printing.
2.Optimize Startup Wizard.
3. Fix the issue that Flash Studio stays offline after recovery from prolonged network outage.
4. Improve reliability to resolve occasional USB drive upgrade failures.
5. Update the QR code on the after-sales guide.
6. Add Z-axis compensation adjustment in the maintenance interface.
7. Fix other known bugs.
Creator5-1.7.8-1.1.7-20260427
1.Optimized the calibration completion prompt.
2.Optimized error prompts for toolhead pick-and-place operations.
3.Fixed the screen freezing issue during filament loading.
4.Fixed the screen freezing issue caused by tapping the screen during printing.
5.Fixed the issue where Flash Studio displays as offline after connecting to the printer.
6.Fixed several issues with the startup wizard.
7.Fixed several issues with the power loss recovery function.
8.Fixed other known bugs.
Creator5-1.7.3-1.1.5-20260411
1.First release
Creator5Pro-1.9.3-1.2.5-20260615
1. Fixed abnormal issues occurring during startup wizard.
2. Fixed abnormal noise under high-speed operation.
3.Optimized the firmware upgrade process.
4. Optimize fan control during filament feeding for models with chamber temperature.
5. Fix other known bugs.
Creator5Pro-1.9.2-1.2.3-20260603
1. Optimize power-off resume printing.
2. Optimize Startup Wizard.
3. Optimize door-open alert logic.
4. Fix the issue that Flash Studio stays offline after recovery from prolonged network outage.
5. Improve reliability to resolve occasional USB drive upgrade failures.
6. Update the QR code on the after-sales guide.
7. Add Z-axis compensation adjustment in the maintenance interface.
8. Fix other known bugs.
Creator5Pro-1.7.8-1.1.7-20260427
1.Optimized the calibration completion prompt.
2.Optimized error prompts for toolhead pick-and-place operations.
3.Fixed the screen freezing issue during filament loading.
4.Fixed the screen freezing issue caused by tapping the screen during printing.
5.Fixed the issue where Flash Studio displays as offline after connecting to the printer.
6.Fixed several issues with the startup wizard.
7.Fixed several issues with the power loss recovery function.
8.Fixed other known bugs.
Creator5Pro-1.7.3-1.1.5-20260411
1.First release