Inside the packaging of the Creator 5 Pro, we have included some small accessories for the convenience of users. The following is a brief description of these accessories：
| Item | PIcture | Description | Usage | Remarks |
| 1 |
 |
Top Cover Lid |
Top cover Lid of the hood |
|
| 2 |
 |
Top Cover Pillar*4 |
provides support for the four front, back, left, and right panels |
|
| 3 |
 |
Top Cover Front & Rear Panels |
Front and rear panels of the top cover, with positioning buckles |
|
| 4 |
 |
Top Cover Left & Right Panels |
Left and Right Panels of the Top Cover |
|
| 5 |
 |
Filament(PLA) | Materials for model forming, supporting rapid printing | The image shows the consumables for the configuration of the Cretor 5 pro package |
| 6 |
 |
Spool Holder*4 |
A bracket for placing filament |
|
| 7 |
 |
Nozzle Blocker*4
|
Block the nozzles in non-operating state to prevent material leakage |
|
| 8 |
 |
Allen Wrench
|
Used for maintenance and disassembly of nozzles, etc. |
|
| 9 |
 |
Grease |
Used for the maintenance of lead screws and guide rails to reduce friction |
|
| 10 |
 |
M3×14*4 |
Spool Holder Fixing Screw |
|
| 11 |
 |
M3×16*2 | Extruder Dock Module Fixing Screw | |
| 21 |
 |
ST2.9×9.5*6 |
Fixing screw for the Extruder Mount connecting wire |
|
| 31 |
 |
M3×6*2 |
Screws required for screen installation |
Inside the packaging of the Creator 5, we have included some small accessories for the convenience of users. The following is a brief description of these accessories：
| Item | PIcture | Description | Usage | Remarks |
| 1 |
|
Filament(PLA) | Materials for model forming, supporting rapid printing | The image shows the consumables for the configuration of the Cretor 5 package |
| 6 |
|
Spool Holder*4 |
A bracket for placing filament |
|
| 7 |
|
Nozzle Blocker*4
|
Block the nozzles in non-operating state to prevent material leakage |
|
| 8 |
|
Allen Wrench
|
Used for maintenance and disassembly of nozzles, etc. |
|
| 9 |
|
Grease |
Used for the maintenance of lead screws and guide rails to reduce friction |
|
| 10 |
|
M3×14*4 |
Spool Holder Fixing Screw |
|
| 11 |
|
M3×16*2 | Extruder Dock Module Fixing Screw | |
| 21 |
|
ST2.9×9.5*6 |
Fixing screw for the Extruder Mount connecting wire |
|
| 31 |
|
M3×6*2 |
Screws required for screen installation |