¶ NOTICE
SAFETY NOTICE: PLEASE CAREFULLY READ AND STRICTLY FOLLOW ALL THE SAFETY WARNINGS AND NOTICES BELOW ALL THE TIME.
Note: Each 3D printer undergoes printing tests before leaving the factory. Filament residue on the nozzle or slight scratches on the build plate are normal and do not affect usage.
¶ WORK ENVIRONMENT SAFETY
- Please keep the workspace clean and tidy.
- Please ensure the equipment operates away from combustible gases, liquids, and dust. High temperatures generated during operation may react with combustible gases, liquids, or airborne dust, potentially causing fires.
- Children and untrained individuals should not operate the equipment alone.
¶ ELECTRICAL SAFETY
- Please properly ground the equipment. Do not modify the plug. Ungrounded equipment/improperly grounded equipment/modified plug will inevitably increase the risk of electric leakage.
- Avoid exposing the equipment to damp or direct sunlight environments. Humidity will increase the risk of electric leakage. Exposure to sunlight will accelerate the aging of plastic parts.
- Make sure to only use the power cord provided by Flashforge.
- Do not use the equipment during thunderstorms.
- Please turn off the equipment and unplug it if it is not in use for a long time.
¶ PERSONAL SAFETY
- Do not touch the extruder, build plate, etc., during printing.
- Do not touch the extruder and build plate after finishing printing to avoid high temperature burns or mechanical damage.
- Do not wear scarves, masks, gloves, jewelry, or other objects that can easily get tangled into the equipment while operating it.
- Do not operate the equipment while you are tired or under the influence of drugs, alcohol or medication.
¶ CAUTIONS
- Keep the inside of the equipment clean. Do not drop metal objects into the grooves at the bottom of the build plate.
- Please clean up filament debris in time. It is recommended to operate this outside the equipment.
- Any modification of the equipment by yourself will void the warranty.
- Please keep the distance between the extruder and build plate for at least 50mm during filament loading. Too-close distance may cause nozzle clogs.
- Please operate the equipment in a well-ventilated environment.
- Do not use the equipment for illegal activities.
- Do not use the equipment to make food storage containers.
- Do not place printed models into your mouth.
¶ EQUIPMENT ENVIRONMENT REQUIREMENTS
- Room temperature: 15-30℃; Humidity: 20-70RH%
¶ EQUIPMENT PLACEMENT REQUIREMENTS
- The equipment must be placed in a dry and well-ventilated environment. A distance of at least 20cm must be reserved around the front, back, left and right sides of the equipment. Recommended storage temperature: 0-40°C.
¶ COMPATIBLE FILAMENT REQUIREMENTS
- When using this equipment, it's recommended to use Flashforge's filaments. If non-Flashforge filaments are used, there will be certain differences in material properties, and print parameters may need adjustments.
¶ FILAMENT STORAGE REQUIREMENTS
- Please store filaments in a dry and dust-free environment after unpacking. It is recommended to use the matching filament dry box for storage.
¶ LEGAL STATEMENT
- Users are not authorized to make any modifications to this User Guide.
- Flashforge shall not be held responsible for any safety incidents resulting from the disassembly or modification of the equipment by the customer. No one is allowed to modify or translate this Guide without Flashforge's permission. This Guide is protected by copyright, and Flashforge reserves the right of the final interpretation of this Guide.
- First Edition(Sep 2023) Copyright © 2024 Zhejiang Flashforge 3D Technology Co., Ltd. All Rights Reserved.