1.Added support for connecting to hidden Wi-Fi networks by manually entering the SSID.
2.Added Wi-Fi icon status display to distinguish unavailable networks.
3.Added an error prompt for movement beyond the boundary after homing.
4.Added the Skip Object feature in the app. Requires updating Flash Studio Mobile to version 1.13.0 or later.
5.Improved Wi-Fi connection stability. Requires updating Flash Studio Desktop to version 1.7.16 or later.
6.Optimized time-lapse video generation stability and resource usage.
7.Improved temperature input interaction with automatic range limiting.
8.Improved live streaming video quality and smoothness.
9. Improved prompts when firmware update fails.
10.Fixed the issue where time-lapse videos could not be generated when file names contained special characters.
11.Fixed the issue where Wi-Fi network names with special characters were truncated in the list.
12.Fixed other known issues.
1.Fix the issue where WiFi auto-connection could occasionally cause a system freeze
2.Time-lapse video API optimization
3.Synchronize print status across three platforms
4.Support LAN and cloud-based management of 3D printers simultaneously
1.Optimized the offline reconnection mechanism for Flash Studio.
2.Added grayed-out display for "My Account" information when offline
3.Fixed errors with resuming prints after power outages.
4. Resolved page lagging issues when offline.
5.Fixed other known bugs.
1.Fixed an issue in power loss recovery.
2.Added greyed-out avatar display when the device is offline.
Adventurer5M-5.1.4-2.2.3-20260515
1.Added support for Flash Studio.
2.Added log upload functionality.
3.Updated the camera streaming service.
4.Optimized the OTA update feature.
5.Fixed other known bugs.
1.Fixed other known bugs.
1.Added periodic cleanup for NIM logs.
Adventurer5M-3.2.5-2.2.3-20251205
1.Updated the NIM library.
Adventurer5M-3.2.4-2.2.3-20251114
1.Added extruder probing at the bed center to compensate for Z-axis deviation for printing with Leveling Before Printing disabled.
2.Added error codes.
3.Improved Wi-Fi reconnection: previously connected networks no longer require re-entering the password.
4.Fixed other known bugs.
1.Optimized the power loss recovery function.
2. Updated the Z-axis and X-axis homing error code numbering.
3. Fixed an issue where power loss recovery failed when the bed temperature was set to 0°C during slicing.
New Features:
1.Enabled setting the bed temperature to 0℃ for print files.
Bug Fixes and Performance Enhancements:
1. Fixed abnormal Wi-Fi icon display issue
2.Refined MCU error reporting.
3.Reduced logging frequency.
4.Fixed an issue where the temperature couldn't be retrieved when printing multiple models on a single plate.
5. Modified the naming format for copied log packages.
Bug Fixes and Performance Enhancements:
1.Fixed some known issues
New Features:
1.Service upgraded.After upgrading this firmware version, please also update Flash Maker to V2.0.0
and Orca-Flashforge to V1.3.0.
2.It now allows the QR code to be refreshed after it expires.
Bug Fixes and Performance Enhancements:
1.Optimize user experience.
Bug Fixes and Performance Enhancements:
1.Change the filament loading/unloading time
Bug Fixes and Performance Enhancements:
1.Fix the issue of incorrect weight display after sending files from Orca-Flashforge.
2. Fix the issue that sometimes the print completion prompt is unable to be closed in Orca-Flashforge.
New Features:
1.Add Traditional Chinese language support
2.Fix the issue that sometimes the print completion prompt is unable to be closed in Orca-Flashforge.
New Features:
1.Add a prompt when connecting to Flash Maker in LAN mode
Bug Fixes and Performance Enhancements:
1.Fix the homing failure issue
2.Optimize the Flash Maker connection stability
New Features:
1.Add a prompt when resuming printing after a power outage
Bug Fixes and Performance Enhancements:
1.Fix the issue of occasional MAC address error.
2.Fix the issue of occasional homing failure during leveling.
3.Fix the issue of occasional heating failure.
New Features:
1.Support Orca-Flashforge online connection and local file list display.
Bug Fixes and Performance Enhancements:
1.Fix the issue that temperature values on the calibration interface exceeded the display area when in the Japanese mode.
2.Optimize X/Y-axis homing failure.
3.Optimize the issue of no Wi-Fi networks showing up after enabling Wi-Fi.
4.Other bug fixes.
New Features:
1.Add a screen protection switch.
2.Add Russian translation.
Bug Fixes and Performance Enhancements:
1. Fix the issue that automatic leveling is not working after the "Leveling" option is checked.
2. Fix the issue of no Wi-Fi networks being found after enabling Wi-Fi.
3. Other bug fixes.
New Features:
1. Add support for displaying 3mf files in the FlashPrint file list
2.Add a feature to continue printing after print completion.
3.Add Turkish translation.
Bug Fixes and Performance Enhancements:
1.Fix occasional non-printing issues.
2.Fix FlashPrint connection status errors.
3.Other bug fixes.
New Features:
1.Support Flash Maker connection
2.Support Orca-Flashforge connection.
3.Support multi-plate printing .3mf files.
4.Support the Exclude objects function.
5. Add PID calibration.
6. Add confirmation popup for multi-select copy and delete functions.
7.Add LAN mode.
Bug Fixes and Performance Enhancements:
1.Fix FlashPrint slicing issues.
2.Optimize UI.
3.Optimize the static IP function.
4.Other bug fixes.
New Features:
1. Add bed preheating before leveling.
2. Add notifications when the temperature is abnormal.
Bug Fixes and Performance Enhancements:
1.Fix some errors that occurred during printing.
2.Fix the abnormal filament extrusion issue for files sliced using FlashPrint.
3.Fix the issue that the extruder fan can not be turned off.
4.Fix the issue that there is no print completion prompt pop-up after your print job is completed.
Bug Fixes and Performance Enhancements:
1.Prioritize preheating the bed before printing.
2.Update user interface icons.
3.Adjust the position when pausing for filament change.
4.Fix file transfer issues for FlashPrint.
5.Optimize the printing process.
6.Enhance user experience.
7.Change the single adjustment unit for Z-offset to 0.025mm.
New Features:
Bug Fixes and Performance Enhancements:
New Features:
Bug Fixes and Performance Enhancements: