In the box of Adventurer 5M series, we have configured some small accessories for the convenience of users. Here is a brief description of these accessories:
| No. | Actual Photo | Description | Application | Note |
| 1 |  |
HS (High-Speed) PLA Filament | Material for printing models; Support fast printing | For Adventurer 5M Pro |
| 2 |  |
Spool Holder and Screws | Installed on the back panel of the printer, used to hold the filament spool | |
| 3 |  |
Diagonal Pliers | Tool for cutting filament during filament change | |
| 4 |  |
Grease (lubricant) | Used for maintenance of lead screws and guide rails, reducing friction | |
| 5 |  |
Glue | Applied to the surface of the PEI steel plate to enhance adhesion | |
| 6 |  |
Nozzle Assembly (0.6mm Diameter) | Large-diameter nozzle, offering reduced print time | When slicing, please match the corresponding nozzle diameter. (In your Adventurer 5M Pro accessory box, we have prepared a 0.6mm nozzle for you!) |
| 7 |  |
USB Flash Drive | For model storage and firmware upgrades | For Adventurer 5M Pro |
| 8 |  |
Unclogging Pin Tool | Tool for cleaning out the nozzle in case of clogs | |
| 9 |  |
Allen Wrench | Used for maintenance and disassembly of the extruder, etc. | |
| 10 |  |
Phillips Screwdriver | Used for maintenance and disassembly of the machine |