To perform refill printing, make sure that IFS is successfully connected to your AD5X. For detailed connection instructions, please refer to Connect IFS to AD5X.
Conditions for refill printing: When there is another channel with the same filament type and color as the one currently being printed, the other channel can be used for refill printing.
For example, if you want to print with Channel 1 and it is estimated that the filament in this channel will not be enough to complete the model, you can set up one or more of Channels 2, 3, or 4 with the same filament type and color. The printer will automatically switch to the corresponding channel and proceed with printing.
