¶ Supplementary Instructions for Accessories in the Box
In the box of AD5X, we have configured some small accessories for the convenience of users. Here is a brief description of these accessories:
| No. | Actual Photo | Description | Application | Note |
| 1 |
 |
HS (High-Speed) PLA Filament | Material for printing models; Support fast printing | For AD5X |
| 2 |
 |
Spool Holder | Used to hold the filament spool; Feature a reverse rewinding mechanism to prevent tangling during filament loading and unloading | |
| 3 |
 |
4-Color Module (IFS) |
1. Manage filament switching during loading and unloading in the printing process; 2. Support automatic filament feeding when loading |
|
| 4 |
 |
Mounting Plate | Used to secure the four-color module (IFS) to the printer | |
| 5 |
 |
IFS Connection Cable | Primarily used for communication between the four-color module and the motherboard | |
| 6 |
 |
4-in-1 Guide Tube | Used to guide the filament into the extruder | |
| 7 |
 |
Cable Clip | Used to secure the IFS connection cable | |
| 8 |
 |
Diagonal Pliers | Tool for cutting filament during filament change | |
| 9 |
 |
Grease (Lubricant) | Used for maintenance of lead screws and guide rails, reducing friction | |
| 10 |
 |
Glue | Applied to the surface of the PEI steel sheet to enhance adhesion | |
| 11 |
 |
Unclogging Pin Tool | Tool for cleaning out the nozzle in case of clogs | |
| 12 |
 |
Allen Wrench | Used for maintenance and disassembly of the extruder, etc. | |
| 13 |
 |
Phillips Screwdriver | Used for maintenance and disassembly of the machine |